New Tech revêtements
bandeau-NT-42

ISACARB 2000

Tungsten carbide refill cord

Classification :

Refill cord DIN EN 14700: T Ni20 (DIN 8555: G21-UM-55-CG)

Properties :

ISACARB 2000 is a special alloy of NiCrBSi with a very high proportion of tungsten carbides (WSC), but made as a flexible, flexible cord.
The weld has very good resistance to abrasion, acids, alkalis and other corrosive media.
ISACARB 2000 allows multi-layering and is free of cracks and welding pores up to 10 mm thick.
The melting point of ISACARB 2000 is approx. 1050 °C. The cord is applied to the torch.

Applications :

Reloading of cast iron, austenitic and ferritic steels, mixer blades, pump parts, screw conveyors, parts for deep drilling.

Physical property :

Hardness : Molten tungsten carbide: approx. 2360 HV0.1
Alloy : NiCrBSi : approx. 420 – 450 HV0,1

Welding recommendation :

Type

6020

Diameter mm

6,0

Grain size

1,00 – 2,00

Indications before reloading :

For the surfaces to be recharged, they must be free of rust, scale, grease and other contaminants. We recommend uniform preheating to 300-350°C. The temperature of the room to be recharged should be at the beginning of application of about 650°C. Reloading is applied with a slight excess of acetylene.

Wear resistance :

ABRASION WEAR

CORROSION WEAR

IMPACT WEAR

TEMPERATURE RESISTANCE

Responsibility : The purpose of this document is to assist the user in the choice of the product. It is up to the user to verify that the chosen product is suitable for the applications for which it is intended. We reserve the right to change the characteristics of the products without prior notice. The descriptions, illustrations and characteristics are provided for information only and cannot engage the responsibility of our company.
Fumes : Please see the information on the Safety Data Sheet available on request.

A QUESTION, NEED FOR QUOTATION